Other norms

1961

N 8018-61
N 8018-61
Location of the fuel tank necks on cars
TESNiERr 2001-61
TESNiERr 2001-61
Plasterworks
Price: $1,002.98
MN 1401-61
MN 1401-61
Staples and sheet templates. Double-sided staples with a handle for lengths from 2 to 250 mm
MN 1402-61
MN 1402-61
Staples and sheet templates. Double-sided staples with handle and elongated jaws for lengths from 20 to 150 mm
MN 1403-61
MN 1403-61
Staples and sheet templates. Double-sided brackets for heights from 3 to 6 mm
MN 1404-61
MN 1404-61
Staples and sheet templates. Double-sided brackets for heights over 6 to 100 mm
MN 1405-61
MN 1405-61
Staples and sheet templates. Double-sided staples with extended jaws for heights above 6 to 100 mm
MN 1406-61
MN 1406-61
Staples and sheet templates. Double-sided templates for heights from 1 to 100 mm
MN 1407-61
MN 1407-61
Staples and sheet templates. Unilateral brackets for heights from 6 to 200 mm
MN 1408-61
MN 1408-61
Staples and sheet templates. Single side brackets with extended jaws for heights from 6 to 100 mm
MN 1409-61
MN 1409-61
Staples and sheet templates. One-sided templates for heights from 1 to 75 mm
MN 1410-61
MN 1410-61
Staples and sheet templates. Double-sided templates for depths from 1 to 100 mm
MN 1411-61
MN 1411-61
Staples and sheet templates. One-sided templates for depths from 1 to 70 mm
MN 1412-61
MN 1412-61
Staples and sheet templates. Double-sided templates for steps from 3 to 300 mm
MN 1413-61
MN 1413-61
Staples and sheet templates. Risk templates for lengths from 3 to 300 mm
MN 1414-61
MN 1414-61
Staples and sheet templates. Step templates for lengths from 20 to 300 mm
MN 1415-61
MN 1415-61
Staples and sheet templates. Patterns for external chamfers with an angle of 30 degrees
MN 1416-61
MN 1416-61
Staples and sheet templates. 45 ° Bevel Patterns
MN 1417-61
MN 1417-61
Staples and sheet templates. 60 ° Bevel Chamfer Templates
MN 1418-61
MN 1418-61
Staples and sheet templates. Scale patterns for external chamfers with an angle of 30 degrees
MN 1419-61
MN 1419-61
Staples and sheet templates. Scale patterns for external chamfers with an angle of 45 degrees
MN 1420-61
MN 1420-61
Staples and sheet templates. Scale templates for external chamfers with an angle of 60 degrees
MN 1421-61
MN 1421-61
Staples and sheet templates. Scale patterns for internal chamfers with a 120 degree angle
MN 1422-61
MN 1422-61
Staples and sheet templates. Patterns for internal chamfers with a 90 degree angle
MN 1423-61
MN 1423-61
Staples and sheet templates. Chamfer templates with 75 degree angle
MN 1424-61
MN 1424-61
Staples and sheet templates. 60 ° angle chamfer patterns
MN 1425-61
MN 1425-61
Staples and sheet templates. 45 ° angle chamfer templates
MN 1426-61
MN 1426-61
Staples and sheet templates. Technical requirements
MN 1805-61
MN 1805-61
Fine worm mills for splined shafts with straight-sided profile in accordance with GOST 1139-58. Light series
MN 1806-61
MN 1806-61
Fine worm mills for splined shafts with straight-sided profile in accordance with GOST 1139-58. Middle series
MN 1807-61
MN 1807-61
Fine worm mills for splined shafts with straight-sided profile in accordance with GOST 1139-58. Heavy series
MN 1809-61
MN 1809-61
Staples for monitoring lengths over 500 to 2000 mm. Staples limit for control of lengths over 500 to 2000 mm. Tolerances
MN 1810-61
MN 1810-61
Staples for monitoring lengths over 500 to 2000 mm. Tubular brackets for monitoring lengths over 500 to 2000 mm
MN 1811-61
MN 1811-61
Staples for monitoring lengths over 500 to 2000 mm. Sponges to tubular brackets for length control
MRTU 6 M-800-61
MRTU 6 M-800-61
Glue brand MPF-1
 

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!