Documents by Year

1930s (71)

1940s (38)

1950s (112)

1960s (281)

1970s (228)

1980s (1104)

1990s (1022)

2000s (10458)

2010s (18476)

2020s (367)

2020 (367)

Other norms

1962

Recommendations on the preparation of questionnaires, protocols of approvals and other documents for ordering equipment used in water supply and sewerage projects

Pipeline parts. Welded taps made of carbon steel with an angle of 30 degrees on Ru to 64 kgf

Pipeline parts. Welded taps made of carbon steel with an angle of 45 degrees on Ru to 64 kgf

Pipeline parts. Welded taps made of carbon steel with an angle of 60 degrees on Ru to 64 kgf

Pipeline parts. Welded taps made of carbon steel with an angle of 90 degrees on Ru to 64 kgf

Bent bends, forged and stamped parts. Pipeline parts. Bent bends of carbon and alloy steel on Ru from 160 to 400 kgf/cm2

Bent bends, forged and stamped parts. Pipeline parts. Concentric transitions of carbon and alloy steel on Ru from 160 to 400 kgf/cm2

Bent bends, forged and stamped parts. Pipeline parts. Equal forged tees forged from carbon and alloy steel on Ru from 160 to 400 kgf / cm2

Bent bends, forged and stamped parts. Pipeline parts. Forged transition tees made of carbon and alloy steel on Ru from 160 to 400 kgf / cm2

Bent bends, forged and stamped parts. Pipeline parts. Transition fittings of carbon and alloy steel on Ru from 160 to 400 kgf/cm2, Du up to 25 mm

Bent bends, forged and stamped parts. Pipeline parts. Transition fittings made of carbon and alloy steel on Ru from 160 to 400 kgf/cm2, Du over 25 mm

Bent bends, forged and stamped parts. Pipeline parts. Welding plugs of carbon and alloy steel on Ru from 160 to 400 kgf / cm2

Bent bends, forged and stamped parts. Pipeline parts. Bends of carbon and alloy steel, steeply curved, with an angle of 90 degrees on Ru from 160 to 400 kgf/cm2...

Bent bends, forged and stamped parts. Pipeline parts. Bends of carbon and alloy steel, steeply curved, with an angle of 60 degrees on Ru from 160 to 400 kgf/cm2...

Bent bends, forged and stamped parts. Pipeline parts. Bends of carbon and alloy steel, steeply curved, with an angle of 45 degrees on Ru from 160 to 400 kgf/cm2

Bent bends, forged and stamped parts. Pipeline parts. Transitions concentric stamped from carbon and alloy steel on Ru from 160 to 400 kgf/cm2

Bent bends, forged and stamped parts. Pipeline parts. Transitions eccentric stamped from carbon and alloy steel on Ru from 160 to 400 kgf/cm2...

Bent bends, forged and stamped parts. Pipeline parts. Bends are steeply curved and transitions from carbon and alloy steel to Ru from 160 to 400 kgf/cm2. Technical requirements

Piping Components. Supports for Steel Pipelines, Welded-on, Fixed and Slip

Details of pipelines. Welded sliding support elongated steel pipelines

Piping Components. Supports for Steel Pipes, Clamp-Type, Fixed

Details of pipelines. Support clamp sliding steel pipelines

Details of pipelines. Supports clamp sliding elongated steel pipelines

Details of pipelines. Fixed pipe clamps of steel pipelines with refrigerant

Details of pipelines. Support clamp sliding steel pipelines with refrigerant

Details of pipelines. Support sliding clamp elongated steel pipelines with refrigerant

Details of pipelines. Fixed frame support and guides of steel pipelines

Details of pipelines. Supports steel pipelines. Two-roller clips

Details of pipelines. Supports steel pipelines. Ice rinks

Details of pipelines. Supports steel pipelines. Squares

Details of pipelines. Supports steel pipelines. Emphasis

Details of pipelines. Supports steel pipelines. Technical requirements

Model project 409-29-62

Automated roadside cement warehouse with a capacity of 360/240 tons. Electrical part

Model project 409-29-62

Automated roadside cement warehouse with a capacity of 360/240 tons. Tab. 5 Electrical part. The task to the manufacturer

Model project 409-29-62

Automated roadside cement warehouse with a capacity of 360/240 tons. Album 6 Issue 1 Non-standardized equipment

Model project 409-29-62

Automated roadside cement warehouse with a capacity of 360/240 tons. Album 6 Issue 2 Non-standardized equipment

Model project 409-29-62

Automated roadside cement warehouse with a capacity of 360/240 tons. Tab. 1 General data. Technological part. Prompts

Model project 409-29-62

Automated roadside cement warehouse with a capacity of 360/240 tons. Album 2 Issue 1 Architectural and sanitary parts. Inventory version (metal in block design).

Model project 409-29-62

Automated roadside cement warehouse with a capacity of 360/240 tons

Cabins of trucks. Types and basic parameters

Recommendations for verifying patent cleanliness of components and equipment when designing sanitary systems for industrial enterprises

Adhesive for rubber parts of the bottom of the shoe

STU 36-13-62-62

KN-2 glue mastic

TESNiERr 2001-62

Price: $1,388.00

Composition for glue PED-B

All Codes and Regulations

Codes	MGSN	OND	PR	SNiP	TU
Decisions	MI	ONTP	PUE	SN	VNTP
Decrees	MR	Orders	RD	SO	VPPB
GN	MSN	OST	RDS	SP	VRD
GOST	MSP	Other norms	Resolutions	ST SEV	VSN
Instructions	MUK	PB	RMU	STO
Laws	MU	PNAE	R	TI
Letters	ND	PND	RSN	TOI
MDK	NPB	POT	RTM	TR EAES
MDS	NP	PPB	SanPiN	TSN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Power industry	Standards for pipe fittings (TPA)
Construction Price Formation	ISO classifier	National Standards for OKSTU	Projects of works (PPR) on bridges	Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Organization Standards	PromExpert	Welding regulations

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!