Documents by Year

1930s (71)

1940s (38)

1950s (112)

1960s (281)

1970s (228)

1980s (1104)

1990s (1022)

2000s (10458)

2010s (18476)

2020s (367)

2020 (367)

Other norms

«
1
…
58
59
60
61
62
63
64
…
70
»

FR.1.99.2015.20333

Method for measuring the sedimentation stability of polishing suspensions based on an aqueous solution of cerium dioxide with dispersing additives by acoustic spectroscopy

FR.1.99.2015.20334

Methods of measurement of nanohardness in the area of the weld, obtained by magnetic-pulse processing

FR.1.99.2015.20335

Method for measuring specific volume of mesopores

FR.1.99.2015.20336

Measurement of the average diameter of mesopores

FR.1.99.2015.20337

Method for measuring the parameters of the microstructure of welds: characteristic sizes, uniformity and orientation of nanoscale components using a high resolution scanning electron microscope

FR.1.99.2015.20338

Methods of measuring the distribution of elements, including zinc, in the area of the weld obtained by magnetic-pulse processing

FR.1.99.2015.20339

Method for measuring the mass concentration of thiophene in benzene on a capillary chromatographic column with a nanostructured stationary phase in a programmable mode

FR.1.99.2015.20340

Measurement of chromatographic parameters in the separation of components of a mixture of freons on a capillary chromatographic column with a nanostructured stationary phase in a programmable mode

FR.1.99.2015.20341

Measurement technique for the separation efficiency of the components of a mixture of structural isomers of aromatic hydrocarbons benzene, toluene, ethylbenzene, o-xylene, m-xylene and p-xylene on a capillary chromatographic column with a nanostructured s

FR.1.99.2015.20342

Measurement procedure for the selectivity of the separation of the components of a mixture of methylene chloride, chloroform, dichloroethane, carbon tetrachloride and a capillary chromatographic column vessel with a nanostructured stationary phase under i

FR.1.99.2015.20343

Method for determining the composition of a mixture of structural hydrocarbon isomers of the C1-C4 group on a capillary chromatographic column with a nanostructured stationary phase under isothermal conditions

FR.1.99.2015.20344

Method for measuring the resolution and the degree of asymmetry of the peaks of carbon dioxide, hydrogen sulfide, sulfur dioxide on a capillary chromatographic column with a nanostructured stationary phase in isothermal

FR.1.99.2015.20345

Methods of measuring the particle size distribution of technological suspensions by the method of acoustic spectroscopy

FR.1.99.2015.20346

Method for measuring the particle size distribution of the technological suspension Klebosol II 30N50 on the Accusizer 780-APS XR particle analyzer

FR.1.99.2015.20347

Methods of measuring the specific surface area of particles of technological suspension Klebosol II 30N50

FR.1.99.2015.20348

Methods of measuring the mass productivity of the synthesis of metal nanoparticles in a gas-discharge generator

FR.1.99.2015.20349

Measurement method of the average size of agglomerates of metal nanoparticles formed from primary nanoparticles during their movement in a gas stream

FR.1.99.2015.20350

Measurement of the size of primary synthesized aerosol nanoparticles using a transmission electron microscope

FR.1.99.2015.20351

Measurement method of the integral concentration of metal nanoparticles in the aerosol stream

FR.1.99.2015.20352

Methods of measuring the energy efficiency of the synthesis of metal nanoparticles in a gas-discharge generator

FR.1.99.2015.20353

Measurement Technique for Dispersed Composition of Synthesized Metal Particles in a Gas Discharge Generator

FR.1.99.2015.20354

Measurement technique for express control of the degree of high molecular adsorption on cerium dioxide nanoparticles

FR.1.99.2015.20355

Method of testing material manufactured standard samples of the sorption properties of mesoporous nanomaterials

FR.1.99.2015.20356

Method for determining the homogeneity of standard samples of the sorption properties of mesoporous nanomaterials

FR.1.99.2015.20357

Method for determining the stability of standard samples of the sorption properties of mesoporous nanomaterials

FR.1.99.2015.20358

Method for determining the certified value of standard samples of the sorption properties of mesoporous nanomaterials

FR.1.99.2015.20359

Interplanar distances of crystalline phases. X-ray diffractometer measurement technique

FR.1.99.2015.20360

The linear dimensions of the elements of the surface topology. Measurement technique using Ntegra scanning probe microscope

FR.1.99.2015.20361

Method for measuring the repetition frequency and duration of current pulses, adapted for calibrating the transcranial exposure device of the type "MDM-101

FR.1.99.2015.20362

Measurement method of leakage current value, adapted for calibration of transcranial exposure apparatus of type "MDM-101

FR.1.99.2015.20363

Methods of measuring the flatness of the surfaces of axial bearings

FR.1.99.2015.20364

Method for measuring non-parallelism of axial bearing surfaces

FR.1.99.2015.20365

Measurement of crack resistance of structural ceramic and metal-ceramic materials by the indentation method

FR.1.99.2015.20366

Constructional heterophase ceramic and metal-ceramic materials. Tribotechnical characteristics. Methods of measuring the coefficient of friction and the critical specific load

FR.1.99.2015.20367

Number average particle diameter. Measurement technique using a transmission electron microscope

FR.1.99.2015.20368

Method for measuring the efficiency of filtration of nanoparticles of aerosols to determine the quality parameters of air purification and disinfection systems

FR.1.99.2015.20369

Method for measuring the microhardness of nanostructured coatings based on chromium

FR.1.99.2015.20370

Methods of measuring the modulus of elasticity of nanostructured coatings based on chromium

FR.1.99.2015.20371

Method for measuring the parameters of the surface relief of nanostructured chromium-based coatings

FR.1.99.2015.20372

Measurement of adhesion strength with the base of nanostructured coatings based on chromium

FR.1.99.2015.20373

Measurement method of energy efficiency of obtaining aerosols with nanoscale particles based on metal oxides in an electric discharge aerosol generator

FR.1.99.2015.20374

Measurement technique for filtration efficiency of inorganic nanoscale aerosols with variable hygroscopicity in air purification and disinfection systems

FR.1.99.2015.20375

Methods of measuring the filtration efficiency of bio-organic nanoscale aerosols in air purification and disinfection systems

FR.1.99.2015.20376

Method for dilatometric measurements of shrinkage of samples formed from aluminum powders and pastes based on them

FR.1.99.2015.20377

Specific surface of mesopores. Measurement Technique

FR.1.99.2015.20378

The average diameter of the mesopores. Measurement Technique

FR.1.99.2015.20379

Method for measuring the uniformity of standard samples of the diameter of nanoparticles of colloidal solutions of aluminum oxide (GSO Al2O3-MC Rosnano), silicon dioxide (GSO SiO2-MC Rosnano), titanium dioxide (GSO TiO2-MC Rosnano) and zinc oxide (GSO ZnO

FR.1.99.2015.20380

Measurement methods for certified values and extended uncertainties for certified values of standard samples of the diameter of nanoparticles of colloidal solutions of aluminum oxide (GSO Al2O3-MT Rosnano), silicon dioxide (GSO SiO2-MT Rosnano), titanium

«
1
…
58
59
60
61
62
63
64
…
70
»

All Codes and Regulations

Codes	MGSN	OND	PR	SNiP	TU
Decisions	MI	ONTP	PUE	SN	VNTP
Decrees	MR	Orders	RD	SO	VPPB
GN	MSN	OST	RDS	SP	VRD
GOST	MSP	Other norms	Resolutions	ST SEV	VSN
Instructions	MUK	PB	RMU	STO
Laws	MU	PNAE	R	TI
Letters	ND	PND	RSN	TOI
MDK	NPB	POT	RTM	TR EAES
MDS	NP	PPB	SanPiN	TSN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Power industry	Standards for pipe fittings (TPA)
Construction Price Formation	ISO classifier	National Standards for OKSTU	Projects of works (PPR) on bridges	Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Organization Standards	PromExpert	Welding regulations

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!